Filter
Top Products
13
English
Changing the Display Brightness
You can dim the display window.
* “AUTO DIM” does not work for CD/MP3.
Changing the Picture Tone
• While showing a playback picture on the TV, you can
select the preset picture tone, or adjust it and store your
own taste.
To select a preset picture tone
1
While playing, display VFP setting screen.
2
Select a preset picture tone.
To erase the screen,
press VFP again while holding SHIFT.
To adjust the picture tone
1
Select “USER1” or “USER2.”
• Follow steps
1
and
2
explained on the left column.
2
Select a parameter you want to adjust.
3
Adjust the parameter.
4
Repeat steps
2
to
3
to adjust other parameters.
To erase the screen,
press VFP again while holding SHIFT.
Adjusting the Audio Input Level
If the sound from the component connected to the
AUX jack is too loud or is not loud enough when changing
from another source to “AUX,” you can change the audio
input level through the AUX jack (without changing the
volume level).
While the “AUX” is selected as a source...
DIM1
Dims the display.
DIM2
Erases the display illumination.
AUTO DIM
Erases the display illumination when
disc playback starts.*
• The display illuminates when
playback stops.
NORMAL
Normally select this.
CINEMA
Suitable for a movie source.
USER1/USER2
You can adjust parameters and can
store the settings.
Remote
ONLY
1
DIMMER
DIM1
DIM2
AUTO DIM
DIM OFF
(Canceled)
(at the same time)
Remote
ONLY
VFP
4
0
NORMAL
GAMMA
BRIGHTNESS
CONTRAST
SATURATION
TINT
SHARPNESS
0
0
0
0
0
(at the same time)
On the TV
NORMAL CINEMA
USER2 USER1
GAMMA
Adjust if the neutral color is bright or
dark (–3 to +3).
BRIGHTNESS
Adjust if the entire picture is bright or
dark (–8 to +8).
CONTRAST
Adjust if the far and near positions
are unnatural (–7 to +7).
SATURATION
Adjust if the picture is whitish or
blackish (–7 to +7).
TINT
Adjust if the human skin color is
unnatural (–7 to +7).
SHARPNESS
Adjust if the picture is indistinct
(–8 to +8).
AUX LVL1
Select this when the sound is too loud (initial
setting).
AUX LVL2
Select this when the sound is not loud enough.
ENTER
TV CH
TV CH
ENTER
TV CH
TV CH
Remote
ONLY
AUX LVL1
AUX LVL2
SET
CANCEL
2 sec.
FS-GD6S[C].book Page 13 Thursday, March 17, 2005 11:13 AM