JVC KD-BT11 CD Player User Manual


 
ENGLISH
32
Symptoms Remedies/Causes
MP3/WMA playback
Tracks do not play back in the order you
have intended them to play.
The playback order is determined when the files are
recorded.
The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
The correct characters are not displayed
(e.g. album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
Bluetooth
The unit cannot be detected by the
Bluetooth device.
Search from the Bluetooth device again.
Reset the unit. When “WAIT PAIR” appears on the
display, search from the Bluetooth device again.
The unit does not make pairing with the
Bluetooth device.
Enter the same PIN code for both the unit and target
device.
Phone sound quality is poor. Reduce the distance between the unit and the
Bluetooth cellular phone.
Move the car to a place where you can get a better
signal reception.
The sound is interrupted or skipped during
playback of a Bluetooth audio player.
Reduce the distance between the unit and the
Bluetooth audio player.
Disconnect the device connected for “PHONE.”
Turn off, then turn on the unit.
When the sound is not yet restored: Connect the
player again.
The connected audio player cannot be
controlled.
Check whether the connected audio player supports
AVRCP (Audio Video Remote Control Profile).
(Operations depend on the connected audio player.)
Disconnect and connect the Bluetooth player again.
The unit does not response when you tried
to copy the phone book to the unit.
You may have tried to copy the same entries (as stored)
to the unit. Press 5 to exit.
EN30-37_KD-BT11[J]f.indd 32EN30-37_KD-BT11[J]f.indd 32 12/3/07 5:43:33 PM12/3/07 5:43:33 PM