Filter
Top Products
26
ENGLISH
To set the movie demonstration—Graphics
When shipped from the factory, the movie has
been activated.
• All Demo: If no operation is done for about
20 seconds, the movie
demonstration starts automatically.
• Int Demo: If no operation is done for about
20 seconds, the movie
demonstration and playback source
indication appears alternately on the
display.
• Off: Cancels the movie demonstration.
To select the source animation on the
display—KeyIn CFM
When changing the source, the display shows
the source animation. You can select the source
animation on the display according to your
preference.
• Long: A long source animation appears.
• Short: A short source animation appears.
• Off: Cancels the source animation.
To select the scroll mode—Scroll
You can select the scroll mode for the disc
information (when the entire text cannot be
shown at once).
• Once: Scrolls only once.
• Auto: Repeats the scroll (in 5-second
intervals).
• Off: Cancels scroll mode.
Note:
Even if the scroll mode is set to “Off,” you can scroll
the display by pressing D (DISP) for more than one
second.
To adjust the display contrast level
—Contrast
You can adjust the display contrast level among
1 to 10.
Adjust it to make the display indications clear and
legible.
To select the display illumination pattern
—LCD Type
You can select the display illumination patterns
according to your preference.
• Auto: Positive pattern will be selected
during the day time (depending on
the “Dimmer” setting); on the other
hand, negative pattern will be used
during the night time (depending on
the “Dimmer” setting).
• Positive: Positive (normal) pattern of the
display.
• Negative: Negative pattern of the display.
To select the font on the display
—Font Type
You can change the font types used on the
display. Select either “1” or “2” according to your
preference.
EN24-32KD-LH1150_1100[J]f.p65 1/25/03, 11:18 AM26