JVC CA-UXEP25 Speaker System User Manual


 
12
To locate a particular portion
While playing a disc, press and hold until the
portion you want is reached.
To locate a track directly and
start play
Remote
ONLY
Examples:
To select track number 5,
press 5.
To select track number 15,
press
>
=
10
J 1 J 5.
To select track number 20,
press
>
=
10
J 2 J 0.
To select track number 125
(for MP3/WMA only), press
>
=
1
0 J 1 J 2 J 5.
Playing back from iPod
This system is equipped with an iPod
®
terminal
on the front panel. You can connect your iPod
to this terminal and enjoy the sound from your
iPod.
Remember you cannot send any data to your
iPod from this system.
IMPORTANT
The iPod battery is charged while the System is
turned on. See the iPod instruction manual about
battery charging.
If you connect an iPod to the iPod terminal and
a USB mass storage class device to the USB
MEMORY terminal at the same time, the system
might be overloaded.
Sound distortion may occur when playing
back audio sources with high recording levels.
Adjusting the iPod’s equalizer to “fl at” is
recommended. For information on operating the
iPod, see the iPod instruction manual.
JVC is not responsible for any loss of or damage to
iPod that might result from the use of this product.
When you connect your iPod to the cable, make
sure it connects all the way in.
Do not carry the System with iPod connected. You
might drop it down or it might cause damages to
the connector part.
Do not touch or hit the iPod terminal pins or the
connecter pins directly. It might cause damages to
the connector part.
Remove the iPod from the cable when you do not
use.
Compatible iPod types:
iPod nano 1G/2G/4G
iPod mini
iPod (4th Generation) 20G/40G
iPod photo (4th Generation)
20G/30G/40G/60G
iPod video (5th Generation) 30G/60G
If the iPod does not play correctly, please
update your iPod Software to the latest
version.
- For details about updating your iPod, check
on the Apple web site
<http://www.apple.com>.
iPod is a trademark of Apple Computer, Inc., registered
in the U.S. and other countries.
To Connect iPod
Connect the iPod to the System using the
supplied cable. Make sure the System is turned
off when you connect it.
Connect the arrow of iPod terminal and the
arrow of the connector facing each other.
You can place the
iPod on the supplied
iPod stand.
Fast-forwards the track.
Fast-reverses the track.
1
2