Filter
Top Products
9
Daily Operations
—
Playback
—
2
3
1
1
Turn on the power.
The STANDBY lamp on the main unit
turns off.
• Without pressing STANDBY/ON ,
the System turns on by pressing one of
the source selecting buttons in the next
step.
2
Select the source.
Playback automatically starts if the se-
lected source is ready to start.
• If you press USB MEMORY, iPod or
USB/AUX/FM/AM, start playback source
on the external component.
3
Adjust the volume.
4
Operate the target source as
explained later.
To turn off (stand by) the System
STANDBY/ON
The STANDBY lamp on the main
unit lights up.
• A small amount of power is al-
ways
consumed even while on
standby.
• The STANDBY lamp blinks slowly when the timer is
on.
For private listening
Connect a pair of headphones to the PHONES jack on
the main unit. The sound will no longer come out of
the speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (stand by) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System
or start playback.
4
3
2
STANDBY/ON
1
Numeric
buttons
4,1,7,
33, ¢
FM MODE
SET/RESUME
DISPLAY
PRESET UP,
PRESET DOWN
Remote control