JVC CA-MXJ200 Speaker System User Manual


 
– 10 –
English
AUX
IN
RIGHT
LEFT
SPEAKERS
RIGHT
LEFT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
ANTENNA
AM LOOP
FM 75
COAXIAL
GND
AM
EXT
Connecting Other Equipment
You can connect an audio equipment — used only as a
playback device.
When you connect and use this equipment, refer also to its
manual.
Be sure that the plugs of the audio cords are color coded:
White plugs and jacks are for left audio signals, and red ones
for right audio signals.
DO NOT connect any equipment while the power
is on.
DO NOT plug in any equipment until all
connections are complete.
To connect audio equipment
Connect the audio output jacks on the other equipment and
the AUX IN jacks on the rear, using an audio cord (not
supplied).
To audio output
NOW, you can plug in the unit and other
connected equipment FINALLY!
To a wall outlet
When connecting the AC power cord into a wall outlet, the
unit automatically starts display demonstration.
To stop the display demonstration, press any button on the
unit or the remote control.
To start the display demonstration manually
Press and hold DEMO for more than 2
seconds.
To stop the demonstration, press any button.
Audio equipment
AUX
IN
RIGHT
LEFT
SPEAKERS
RIGHT
LEFT
CAUTION:
SPEAKER IMPEDANCE
6~16 OHMS
ANTENNA
AM LOOP
FM 75
COAXIAL
GND
AM
EXT
DEMO
CANCEL
CA-MXJ300/J200[E] 01-14EN/f 00.4.7, 5:52 PM10