JVC CA-MXJ100 Speaker System User Manual


 
– 18 –
English
Using Sleep Timer
With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is operating.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes by.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time
appears and the SLEEP indicator lights up on
the display.
Each time you press the button, the time length changes
as follows:
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 3 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
Sleep Timer is also canceled when you turn off the unit.
90 MIN
OFF
(Canceled)
60 MIN
45 MIN
30 MIN
15 MIN
7
Select the preset station.
1) Press 4 or ¢ to select
the band (“FM,” “MW,” or
“LW”), then press
PROGRAM/SET.
2) Press 4 or ¢ to select a
preset channel number.
8
Press PROGRAM/SET.
The indicator stops flashing and
remains lit.
If you have set the Recording Timer
with the unit turned on, turn off the unit.
The REC indicator lights up when the unit is turned off
(on standby).
To select Recording or Daily Timer after its setting
has been done
Press TIMER ON/OFF on the remote
control.
Each time you press the button, the timer mode
changes as follows:
TIMER: Select this when you want to use only
the Daily Timer.
REC: Select this when you want to use only
the Recording Timer.
TIM+REC: Select this when you want to use both
the Daily Timer and the Recording
Timer.
OFF: Select this when you do not want to use
the timer.
When the timer is set to OFF, the indicator and/or
REC indicator goes off from the display.
Even if the Recording or Daily Timer is canceled, but the
setting condition for the Recording or Daily Timer
remains in memory.
When any timer setting is activated, the indicator
and/or REC indicator lights up again.
If the unit is operating when the timer-on time comes
Recording or Daily Timer does not work.
TIMER
ON/OFF
PROGRAM/SET
PROGRAM/SET
SLEEP
TIMER
OFF
REC
TIM+REC
EN15-20.CA-MXJ100[E]/f 00.4.3, 11:59 AM18