JVC CA-MXG50 Stereo System User Manual


 
– 17 –
English
Recording
Recording a Tape on Deck B
On the unit ONLY:
1
Press EJECT 0 for the deck B.
2
Put a recordable cassette in with the exposed
part of the tape down.
3
Close the cassette holder gently.
4
Start playing the source — FM, AM, CD
player or auxiliary equipment connected to
AUX IN jacks.
When you want to use the dubbing method, see
“Dubbing Tapes” on page 18.
When the source is CD, you can also use CD Synchro
Recording (see “CD Synchronized Recording” on
page 18.)
5
Press REC START/STOP.
The REC (recording) indicator lights up on
the display and recording starts.
To stop during recording, press REC START/STOP again
or 7.
To remove the cassette, press EJECT 0 for deck B.
IMPORTANT:
It may be unlawful to record or play back copyrighted
material without the consent of the copyright owner.
The recording level is automatically set correctly, so it is
not affected by the VOLUME control, the SOUND MODE
control and the SUBWOOFER LEVEL control. Thus,
during recording you can adjust the sound you are actually
listening to without affecting the recording level.
While recording, you can hear sound modes through the
speakers or headphones. However, the sound is recorded
without these effects (see page 11).
If recordings you have made have excessive noise or static,
the unit may be too close to a TV. Place the unit away from
the TV.
You can use type I tape for recording.
To protect your recording
Cassettes have two small tabs
on the back to protect
unexpected erasure or re-
recording.
To protect your recording,
remove these tabs.
To re-record on a protected tape, cover the holes with
adhesive tape.
To keep the best recording and playback sound quality
If the heads, capstans, and pinch rollers of the cassette decks
become dirty, the following will occur:
Impaired sound quality
Discontinuous sound
Fading
Incomplete erasure
Difficulty in recording
To clean the head, capstan, and pinch roller
Use a cotton swab moistened with alcohol.
To demagnetize the head
Turn off the unit, and use a head demagnetizer (available at
electronics and audio shops).
Head
Capstan
Pinch roller
Erase head
REC START
/STOP
CD
RE
C
EJECT
EJECT
EN17-24.CA-MXG50[UW]_f 01.4.4, 0:10 PM17