Filter
Top Products
15
English
• Pressing CD 3¥8 instead of the disc number buttons
starts playing back the currently selected disc.
• If no disc is placed on the selected disc tray, “NO DISC
1,” “NO DISC 2,” or “NO DISC 3” appears on the
display. Then, the unit continue searching for a disc
from the next disc tray.
To stop playing, press 7.
To remove the disc, press 0 for the corresponding disc tray.
Disc playback sequence
When 3 discs* are loaded on the disc trays, they are played in
one of the following sequences.
• When CD1 is pressed: CD1 ] CD2 ] CD3 (then stops)
• When CD2 is pressed: CD2 ] CD3 ] CD1 (then stops)
• When CD3 is pressed: CD3 ] CD1 ] CD2 (then stops)
* When only 2 discs are loaded, they are played in the same
order, but the disc tray without a disc is skipped.
Basic Disc Operations
While playing a disc, you can do the following operations.
To exchange discs during playback of another
Press 0 corresponding to a disc, not
playing or selected currently, to eject
and exchange the disc.
If you exchange discs during play, the
current play will not stop until all discs
you have exchanged are played.
To stop play for a moment
Press CD 3¥8.
While pausing, the elapsed playing time flashes
on the display.
To resume playing, press CD 3¥8 again.
To go to another track
Before or during play, turn 4 / ¢ (or press
4 (1) / ¢ (¡) on the remote control).
• 4 (or 4 (1)):
Goes back to the beginning of the
current or previous tracks.
• ¢ (or ¢ (¡)):
Skips to the beginning of the next or succeeding tracks.
To locate a particular point in a track
During play, press and hold 1 or
¡ (or 4 (1) / ¢ (¡) on
the remote control).
• 1 (or 4 (1)):
Fast-reverses the disc.
• ¡ (or ¢ (¡)):
Fast-forwards the disc.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or during play allows
you to start playing the track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10
three times, then 2.
P
R
E
S
E
T
CD
1
4
7
10
2
5
8
3
6
9
10
Track number Elapsed playing time
CD3
CD2
CD1
Playing Back the Entire Discs—Continuous Play
You can play discs continuously.
1
Load discs.
2
Press one of the disc number
(CD1, CD2, or CD3) buttons
for the disc you want to play.
The unit searches for the disc, and
starts playing with the first track of the
selected disc.
TRACK
1 2 3 4
5 6 7 8
9 10 11 12
1314 1516
Tracks of the currently playing disc (Track
numbers exceeding 16 are not displayed.)
EN14-19.CA-HXZ9[UW]f.p65 03.2.12, 5:11 PM15