Filter
Top Products
– 15 –
Switching to a Program Type of Your Choice
Temporarily
The Enhanced Other Networks function allows the unit to
switch temporarily to a broadcast program of your choice
(TA, NEWS, or INFO) from a different station.
• The Enhanced Other Networks function only works when
you are listening to a preset FM RDS stations providing the
data.
To activate the Enhanced Other Networks function
REMEMBER you must preset FM RDS stations to use the
function. If not yet done, see page 13.
• There is a time limit in doing the following steps. If the setting
is canceled before you finish, start from step
1
again.
On the remote control ONLY:
1
Press TA/NEWS/INFO until the
data type you want appears on the
display.
The selected data type indicator flashes on the
display.
• Each time you press the button, the data types change as
follows:
TA: Traffic announcement
NEWS:News
INFO: Program the purpose of which is to impart
advice in the widest sense.
OFF: The function is canceled. The data type indicator
(TA, NEWS, INFO) goes off.
2
Wait for about 5 seconds after specifying the
data type.
The data type indicator stops flashing and remains lit.
Now, the function is activated. See “How the Enhanced
Other Networks function actually works.”
How the Enhanced Other Networks function actually
works:
CASE 1
If there is no station broadcasting the program you
have selected
The unit continues tuning in to the current station.
«
When a station starts broadcasting the program you have
selected, the unit automatically switches to the station.
The indicator of received PTY code starts flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the function still remains
activated.
CASE 2
If there is a station broadcasting the program you
have selected
The unit tunes in to the program. The indicator of received
PTY code starts flashing.
«
When the program is over, the unit goes back to the
previously tuned station, but the function still remains
activated.
CASE 3
If the FM station you are listening to is broadcasting
the program you have selected
The unit continues to receive the station but the indicator
of received PTY code starts flashing.
«
When the program is over, the indicator of received PTY
code stops flashing and remains lit, but the function still
remains activated.
More about the Enhanced Other Networks function
• The data sent from some stations may not be compatible with this
unit. In this case, the function may not work correctly.
• While listening to a program tuned in by the function, the station
does not change even if another network station starts
broadcasting a program of the same data.
• The function is canceled when you change the source to CD,
TAPE, or AUX, while it is temporarily canceled when you change
the source to AM.
• This function is also canceled when you turn off the unit.
RDS TA
TA
NEWS INFO
OFF
(Canceled)
EN10-15.CA-HXZ1R_HXZ1[B_A]f.pm6 4/1/02, 12:48 PM15