JVC CA-FSGD7 Stereo System User Manual


 
10
Daily Operations
—Playback
1
Turn on the power.
The STANDBY lamp on the main unit turns off.
Without pressing AUDIO , the System turns on
by pressing one of the source selecting buttons in the
next step.
2
Select the source.
Playback automatically starts if the selected source is
ready to start.
If you press AUX or USB, start playback source on
the external component.
3
Adjust the volume.
4
Operate the target source as explained
later.
To turn off (standby) the System
To turn off the clock indication to save the power
While the System is turned off...
2
1
3
4
FM/PLAY
MODE
DISC
SELECT
1/¡
TOP MENU
3D PHONIC
MENU
RETURN
1
3
GROUP/TITLE
4,¢
SHIFT
SET
DISPLAY
8
7
2
2,3,5,
ENTER
Numeric
buttons
The STANDBY lamp on the main unit
lights up.
•A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on the
main unit. The sound will no longer come out of the
speakers. Be sure to turn down the volume before
connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound can
damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
• Press the button again, to
display the clock
indication.
(at the same time)
FS-GD7[J]_EN.book Page 10 Thursday, February 3, 2005 7:49 PM