JVC CA-EXA5 Stereo System User Manual


 
25
Advanced operations
1 Press ZOOM during playback or
while paused.
Each time you press the button, the picture
magnification will be changed.
(For a JPEG) You cannot change the
picture magnification during slide-show
playback.
2 Select the portion you want to
see by using cursor 5 // /2 /3.
To resume normal playback, select “OFF” in
Step 1.
1 Press VFP during playback or
while paused.
“VFP SET” will appear on the display window
on the main unit and the current setting will be
displayed on the TV screen.
Gamma: Controls brightness of neutral tints
while maintaining brightness of dark and
bright portions.
Sharpness: Controls screen sharpness.
2 Press cursor2 /3 to select VFP
mode.
It is recommended to select “NORMAL”
usually, or “CINEMA” in a dark room. When
either “NORMAL” or “CINEMA” is selected,
go to Step 7.
When either “USER 1” or “USER 2” is
selected, the adjustment can be carried out
in detail in the operations after Step 3.
3 Press cursor5 // to select an
item to be adjusted.
4 Press ENTER.
5 Press cursor5 // to change the
value.
6 Press ENTER.
To adjust other items, go back to Step 3.
7 Press VFP.
NOTE
If no operation is made for several seconds during
the procedure, the settings made so far will be
automatically stored.
“VFP” is an abbreviation of “Video Fine Processor”.
Enlarging the picture
(ZOOM)
Adjusting the picture
quality (VFP)
(only for moving image)
GAMMA
TV screen
Example:
EXA1mkII[B]-04.fm Page 25 Tuesday, October 12, 2004 9:05 AM