Filter
Top Products
11
Connecting up Connection
• In standby mode, set the RGB-Y/C selector
correctly according to your TV.
• When the TV accommodates the RGB video
signal, set the RGB-Y/C selector to RGB so
that you can enjoy better-quality pictures.
• When the TV accommodates the S-video
signal, set the RGB-Y/C selector to Y/C.
• When the TV accommodates the composite
video signal only, set the RGB-Y/C selector to
RGB.
CAUTION
Connect the main unit directly with a TV (or a
monitor) without routing through a VCR.
Otherwise it may cause picture distortion while
playing.
Also, when connecting the main unit to a TV with
a VCR built in, there may be picture distortion
while playing.
• Connect the power cord after all other
connections are complete.
• The STANDBY lamp (on the front panel) will be
lit.
Connecting with TV
TV
To SCART connector
Main unit
SCART cable (sold separately)
Main unit
Connecting directly
TV (or
monitor)
Connecting the power cord
AC outlet
Supplied power cord
Main unit
Getting started
EXA1[DOM].book Page 11 Monday, December 22, 2003 3:33 PM