Filter
Top Products
23
English
3. Press the number keys (1 to 10 and +10) to select the track to program.
❏ Example: For track 5, press 5. For track 15, press +10 then 5. For track 20, press +10 then
10. For track 32, press +10 three times, then 2.
The blinking disc number and track number changes to a steady light, and the step number is
displayed.
4. Repeat setps 2 to 3 to select the other tracks for the program.
5. Press the £ button.
The Unit plays the tracks in the order you have programmed them.
❏ If you try to program a 33rd step, the CA-D672TR lets you know that the program is full by
displaying the message “FULL” on the display.
❏ If you try to program an disc tray that is empty, or a track number that does not exist on a disc
(for example, selecting track 14 on a disc that only has 12 tracks), the selected disc or track are
skipped when the program is played.
❏ You can skip to a particular program step during program play. To do this from the unit, move
the MULTI CONTROL stick left or right, to do so from the remote control press the 4 or ¢
buttons.
❏ To play the programmed tracks over and over, press the REPEAT button . The Repeat mode
indicators light up in sequence with each press of the REPEAT button.
To stop playing, press the 7 button.
To delete all the tracks in a program, keep pressing the CANCEL button on the Unit until all the
tracks in the program have been deleted, or press the 0 button for each disc in the program.
To exit Program Mode, press the PROGRAM/RANDOM button twice to change to Continuous Play
mode.
To Check the Program ———————————————————————
While the CD Player is stopped, use the 4 or ¢ buttons on the remote control to check the
contents of the program.
Each time you press the ¢ button, the program contents are shown on the display in the pro-
grammed order. Pressing the 4 button displays the previous step in the program.
To Modify the Program———————————————————————
Modify the contents of a program while the CD Player is stopped.
Press the CANCEL button on the Unit, the last track in the program is deleted.
Each time you press the button, the last track listed in the program is deleted from the program.
To add a track to the program, follwo the procedure above (on either the Unit or the Remote
Control). The news tracks are added to the end of the program.
Random Play
The tracks will play in no special order when you use this mode.
1. Press the PROGRAM/RANDOM button while the CD Player is stopped to change to the Random
Mode display.
❏ The display changes with each press of the PROGRAM/RANDOM button, as shown below.
= PROGRAM = RANDOM = Off (Continuous Play) = (back to the beginning)
2. Press the ‹/8 or CD button (or the £ button on the Remote Control).
The tracks are played in random order.
When all of the tracks have been played, the CD Player stops.
SOUND
MODE
PROGRAM
6
VOL
CD
PROGRAM
/ RANDOM
SOUND
MODE
RANDOM
1234
5678
9
10 11 12
1413 1516
VOL
CD
EN01-42.CA-D672TR[E]/F 05.3.24, 9:27 PM23