JVC CA-MXJ980V Stereo System User Manual


 
– 24 –
English
Using the Microphones
You can enjoy singing along (Karaoke) and microphone mixing
using two microphones.
The MIC LEVEL control adjustment is valid for both
microphones connected to the MIC 1 and MIC 2 jacks.
IMPORTANT:
Always set the MIC LEVEL to MIN when connecting or
disconnecting the microphone.
When you are not using the microphones, disconnect them.
Singing Along
Vocal Masking
Vocal Masking reduces the lead vocal of the playing source,
and allows you to replace it by singing into the microphones
as the music plays.
On the unit ONLY:
1
Rotate the MIC LEVEL to MIN.
2
Connect the microphone(s) (not supplied) by
plugging it into the MIC 1 and/or MIC 2
jack.
3
Press VOCAL MASKING on the
remote control.
The karaoke indicator ( ) lights up on the display.
4
Start playing the source — CD, tape, or other
connected component.
5
Rotate the MIC LEVEL and
VOLUME controls as you sing into
the microphone(s).
By pressing REC START/STOP, you
can record your singing along if you
want. (For more details, see page 21.)
To Apply an Echo to Your Voice
Press ECHO on the remote control so that the echo ( ) indicator
lights up on the display.
Each time you press the button, the echo level
changes as follows:
If howling or squealing (feedback) occurs while using
the microphone(s)
Take the following actions to prevent these noises.
Adjust the MIC LEVEL and VOLUME control.
Avoid pointing the microphone(s) towards the speakers.
When two microphones are connected, turn off the On/Off switch
on the unused microphone.
If you use the following sources as the playing source for
Vocal Masking, you cannot get satisfactory results
Radio programs — a radio signal is not as reliable as the signals
coming from a tape or CD.
Monaural sources.
Poorly dubbed tapes.
Sources recorded with duets, strong echo, a chorus, or only a few
instruments.
Poorly prerecorded tape or CD.
Singing Along with Multiplex Karaoke Discs
(MPX)
If the source you are going to play is a multiplex karaoke disc,
you can use the Multiplex sound function via the buttons on the
unit.
What is Multiplex Sound?
On a multiplex karaoke disc, the instrumental parts are recorded
on the left channel. With this system, you can replace the vocal
part with your voice through the microphone.
On the unit ONLY:
1
Rotate the MIC and VOLUME LEVEL
to MIN.
2
Connect the microphone (not supplied) into
the MIC 1 and/or MIC 2 jack on the front
panel.
3
Play the source - CD.
4
Press MPX to select the output sound.
Please refer to page 19.
MIC LEVEL
MIN MAX
ECHO 1
ECHO 2
OFF
(Canceled)
ECHO 3
As the number increases, a stronger
echo effect is applied to your voice.
MIC LEVEL
MIN MAX
MPX
EN21-31.MX-J970[U] 16/06/2000, 11:19 AM24