Filter
Top Products
– 19 –
English
VIDEO INTRO
1
23
4
56
7
89
HIGH LIGHT
1
23
4
56
7
89
The TV screen will show the following:
Viewing highlights
•
If a highlight scene is not selected while 9 scenes are shown on the
TV, highlight scenes of the next track will appear on the display.
• When a highlight scene is selected, playback starts from the
beginning of the highlight scene, but not from the still image
shown on the display (the part shown is the last part of the
highlight scene, not its beginning)
• During the video intro or highlight play, images shown on the
display may be partially distorted, resulting from noise or
incorrect manufacturing of the disc.
Playing a Multiplex Sound CD
This function is used for multiplex sound discs. See manuals
attached to discs for detailed information.
Operation
By pressing the MPX button consecutively, channel
multiplexing modes are cycled as shown below.
When Lch MONO or Rch MONO is selected, display indicates
Lch MONO or Rch MONO respectively.
Lch MONO: Only the left channel (instrumental parts) is
played back through both right and left speak-
ers.
Rch MONO: Only the right channel (vocal parts) is played
back through both right and left speakers.
NORMAL: Used for conventional stereo sources.
When playing back a SVCD (Super Video CD) channel,
multiplexing modes will cycle as follows:
Lch MONONORMAL
(Left channel/
right channel)
Rch MONO
initial*
STEREO 2STEREO 1
MONO 1
MONO 3MONO 4 MONO 2
initial*
SUBTITLE 1
OFF
(Cancelled)
SUBTITLE 2 SUBTITLE 3 SUBTITLE 4
3
Press the number button for
the video intro you want to
select.
Playback starts from the selected
track.
To stop and cancel the video intro play, press 7 .
Viewing the Highlights of a Video CD
You can view highlight scenes of the selected track on a
video CD only when PBC is off. These highlight scenes are
created by dividing the track equally into 9 portions and the
beginning scenes (5 seconds each) of those 9 portions are
shown on the display.
1
Press CD 1-3, and the number
button for the track you want to
view the highlights of.
Playback starts.
2
Press HIGHLIGHT on the Remote
after a picture appears on the TV
screen.
The highlight play starts and shows in
sequence, the first 5 seconds of nine track divisions on the
TV screen for 1 minute. If a highlight scene is not
selected, it will automatically stop after a few minutes.
TV screen will show the following:
3
Press the number button for
the highlight you want to
select.
Playback starts from the selected
scene.
To stop and cancel the highlight play, press 7 button.
MPX sound modes
Note that you can hear no audible sound in the STEREO 2, MONO 3
and MONO 4 positions if no audio is recorded on STEREO 2.
Initial*: Whenever you change a CD or when you select another CD
tray, MPX will be reset to the initial mode.
Using SUBTITLES
Effective only when playing back all SVCD (Super Video CD).
SVCD discs may have up to four subtitles which you can select
to view on the TV screen (as an optional feature). Pressing the
SUBTITLE button (on the remote) cycles the subtitle as shown
below:
1
2
3
MPX
EN13-20.MX-J970[U] 16/06/2000, 11:18 AM19