Filter
Top Products
38
ENGLISH
About sounds reproduced through the
rear terminals
• Through the analog terminals (Speaker
out/LINE OUT):
2-channel signal is emitted. When playing a
multi-channel encoded disc, multi-channel signals
are downmixed. (AUDIO—DOWN MIX: see page
34.)
• Through DIGITAL OUT (optical):
Digital signals (Linear PCM, Dolby Digital, MPEG
Audio) are emitted through this terminal. (For
more details, see table below.)
To reproduce multi-channel sounds such as Dolby
Digital and MPEG Audio, connect an amplifier or
a decoder compatible with these multi-channel
sources to this terminal, and set “DIGITAL AUDIO
OUTPUT” correctly. (See page 34.)
Output signals through the DIGITAL OUT terminal
Output signals are different depending on the “DIGITAL AUDIO OUTPUT” setting on the setup menu (see page
34).
Playback Disc
Output Signal
STREAM/PCM
DOLBY DIGITAL/
PCM
PCM ONLY OFF
DVD-Video 48 kHz, 16/20/24 bits
Linear PCM
48 kHz, 16 bits stereo Linear PCM *
OFF
96 kHz, Linear PCM 48 kHz, 16 bits stereo Linear PCM
Dolby Digital
Dolby Digital bitstream
48 kHz, 16 bits
stereo Linear PCM
MPEG Audio MPEG bitstream 48 kHz, 16 bits stereo Linear PCM
Audio CD, Video CD 44.1 kHz, 16 bits stereo Linear PCM /
48 kHz, 16 bits stereo Linear PCM
MPEG 44.1/48 kHz, 16 bits Linear PCM
MP3/WMA 32/44.1/48 kHz, 16 bits Linear PCM
WAV 44.1 kHz, 16 bits stereo Linear PCM
* Digital signals may be emitted at 20 or 24 bits (at their original bit rate) through the DIGITAL OUT terminal if the
discs are not copy-protected.
On-screen guide icons
During playback, the following guide icons may
appear for a while on the monitor.
: Playback
: Pause
: DVD-Video/VCD: Forward slow
motion
: DVD-Video: Reverse slow motion
: Forward search
: Reverse search
DVD: The following icons appear at the beginning of
a scene containing:
: Multi-subtitle languages
: Multi-audio languages
: Multi-angle views
EN38-44_KD-ADV5580[J]1.indd 38EN38-44_KD-ADV5580[J]1.indd 38 10/30/08 3:13:59 PM10/30/08 3:13:59 PM