Filter
Top Products
4
LOCATION OF CONTROLS
1) DUST COVER
2) LEFT SPEAKER
3) DIAL SCALE
4) TUNING KNOB
5) FUNCTION SELECTOR (PHONO/AM/FM/FM STEREO)
6) FM STEREO INDICATOR
7) RIGHT SPEAKER
8) POWER ON/OFF AND VOLUME CONTROL
9) POWER LED INDICATOR
10) 45 RPM ADAPTOR
11) 33/45/78 RPM SPEED SELECTOR
12) TONE ARM CLAMP
13) AUTO STOP SWITCH
14) LINE OUT SOCKET
15) FM ANTENNA
16) AC CORD
CAUTION:
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
• UNPACK ALL PARTS AND REMOVE THE PROTECTIVE MATERIAL.
• DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE.
• DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL INCHES
AROUND THE UNIT FOR VENTILATION.
POWER CONNECTION
1. CONNECT THE POWER CORD (16) TO A 120V AC ~ 60Hz OUTLET.
2. TURN ON THE POWER (8) BY ROTATING THE VOLUME CONTROL CLOCKWISE UNTIL A CLICK IS HEARD.
IF THE POWER LED INDICATOR (9) IS ON WITH RED LIGHT, IT MEANS THAT THE POWER SUPPLY IS
NORMAL. NOW YOUR SYSTEM IS READY TO PLAY THE MUSIC.
LISTENING TO RADIO
1. SET THE FUNCTION SELECTOR (5) TO THE DESIRED RADIO BAND (AM, FM OR FM-STEREO).
2. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (4).
3. ADJUST THE VOLUME CONTROL (8) TO OBTAIN THE DESIRED SOUND LEVEL.
FM & FM-STEREO RECEPTION
z WHEN THE FUNCTION SELECTOR (5) IS SET TO THE “FM” POSITION, PROGRAMS ARE RECEIVED IN
MONO MODE. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE
PROGRAM IN MONO.
z SET THE FUNCTION SELECTOR (5) TO THE “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS.
THE LED “ST” INDICATOR (6) WILL LIGHT UP WHEN A FM STEREO PROGRAM IS BEING RECEIVED.