Filter
Top Products
© Jeff Rowland design gRoup 2007. all Rights ReseRved.
13
Output Power, Continuous RMS 250 watts @ 8 ohms, 500 watts @ 4 ohms
Frequency Response 5 Hz – 70 kHz, 3 dB @ 8 ohms
Peak Output Current > 35 amps
Dynamic Range 117 dBa
Load Impedance Range 2 ohms – 16 ohms
Input Impedance 40k ohms
THD + Noise, 0.1 watts – 500 watts, 4 ohm < .05%, Typically .006% @ 1 kHz
CCIF Intermodulation Distortion, 19/20 kHz < .002%
Damping Factor @ 1 kHz 1000
Overall Gain Selectable Internal Jumper, 26 or 32 dB
Common Mode Rejection Ratio > 90 dB, 20 Hz – 20 kHz
Absolute Phase Non-inverting, Pin 2 Positive
Inputs
1 Balanced XLR
(Unbalanced operation requires an optional XLR to RCA adapter)
Outputs 1 CE-Approved Speaker Wire Clamp
Power Consumption Idle – 9 watts, Maximum – 650 watts
Amplifier Weight
13 lbs. / 6 kg
Overall Amplifier Dimensions (H) x (W) x (D)
3.1” x 8.4” x 13.1”
79 mm x 213 mm x 333 mm
SPECIFICATIONS
OWNER’S MANUAL MODEL 201 MONO AMPLIFIER