Filter
Top Products
Model 302 Stereo Power Amplifier SpecificationsModel 302 Stereo Power Amplifier Specifications
Output Power:
Continuous RMS watts, both channels driven
@ 8 ohms
@ 4 ohms
Power Bandwidth:
Peak Output Current:
Dynamic Range:
THD + Noise, 0.1W-500W/4 ohm:
CCIF Intermodulation Distortion, 19/20 kHz:
Damping Factor @ 1kHz:
Overall Gain:
(Balanced or Unbalanced)
Input Impedance:
Common Mode Rejection Ratio:
Absolute Phase:
Inputs:
Outputs:
Power Consumption:
Standby Switch OFF
Standby Switch ON (idle)
Maximum
Amplifier Weight:
Shipping Container Dimensions:
Shipping Weight:
Output Power:
Continuous RMS watts, both channels driven
@ 8 ohms
@ 4 ohms
Power Bandwidth:
Peak Output Current:
Dynamic Range:
THD + Noise, 0.1W-500W/4 ohm:
CCIF Intermodulation Distortion, 19/20 kHz:
Damping Factor @ 1kHz:
Overall Gain:
(Balanced or Unbalanced)
Input Impedance:
Common Mode Rejection Ratio:
Absolute Phase:
Inputs:
Outputs:
Power Consumption:
Standby Switch OFF
Standby Switch ON (idle)
Maximum
Amplifier Weight:
Shipping Container Dimensions:
Shipping Weight:
300 watts.
500 watts.
5 Hz - 60 kHz, -3 dB.
>45 Amps.
117 dBA.
<.05%, typically .006 @ 1kHz.
<.002%.
275.
Selectable Internal Jumper,
26 or 32 dB.
40k ohms.
>90dB, 20 Hz - 20 kHz
Non-inverting, Pin 3 Positive.
User Selectable,
2 x Balanced XLR
2 x Unbalanced RCA.
2 Pairs Parallel Binding Posts
per Channel.
45 watts.
55 watts.
1200 watts.
95 lbs./43 kg.
27” (L) x 21” (W) x 16” (H)/
68 cm (L) x 54 cm (W) x 41 cm.
103 lbs./47 kg.
300 watts.
500 watts.
5 Hz - 60 kHz, -3 dB.
>45 Amps.
117 dBA.
<.05%, typically .006 @ 1kHz.
<.002%.
275.
Selectable Internal Jumper,
26 or 32 dB.
40k ohms.
>90dB, 20 Hz - 20 kHz
Non-inverting, Pin 3 Positive.
User Selectable,
2 x Balanced XLR
2 x Unbalanced RCA.
2 Pairs Parallel Binding Posts
per Channel.
45 watts.
55 watts.
1200 watts.
95 lbs./43 kg.
27” (L) x 21” (W) x 16” (H)/
68 cm (L) x 54 cm (W) x 41 cm.
103 lbs./47 kg.
2121