Filter
Top Products
25
JBL Professional
5. Wrap the opposite end of the open jacket around the riser ring as
shown in Figure 4. Be certain that the bottom of the protective jacket
is tucked-in all the way around the riser ring as shown.
6. “Zip” up the Velcro strip and pull the draw cord closed as required
as shown in Figure 5. The protective jacket should now be securely
fastened all the way around the riser ring at the bottom and top end of
the jacket and should be closed securely forming a protective closure
around the connector panel.
7. Repeat the process for the other connector panel.
Figure 4
Figure 5