JBL SRX818SP Speaker User Manual


 
23
COMPONENT ELEMENTS
High Performance Without Compromise
From the brand new transducers to the 14-guage steel grilles, each component in the SRX800 Series was specifically designed
for optimal performance in these systems. Featuring a purpose-built Crown amplifier and a full suite of user configurable DSP,
these systems deliver the latest technologies from Harman Professional in one easy to use, high performing platform.
2432H HF Driver
High frequencies are handled by the JBL 2432H 3” voice-coil Compression
Driver - the only 3” voice coil in this class. In addition to the weight reduction
provided by neodymium, the large voice coils and diaphragms in these drivers
are capable of handling very high power levels with reduced distortion and
increased phase coherence resulting in smooth, crystal clear high frequencies.
Low Frequency Drivers
JBL’s patented Differential Drive® Technology ferrite drivers incorporate
3” voice coils with lower mass ferrite magnets for reduced weight while
maximizing power amp efficiency with greater heat dissipation and increased
power handling resulting in exceptionally low distortion and extended low
frequency response.
Mid Frequency Drivers
SRX835’s midrange driver is derived from the midrange transducer on the
VTX 20 touring line array system. The outside cast aluminum frame acts as
the structural support, acoustic cavity, and heat sink for the driver, optimizing
both space in the speaker cabinet and the performance of the system at the
same time.
Patented (PT) Waveguides
High frequency drivers use JBL’s patented Progressive Transition Waveguides
which offer dramatically improved constant beamwidth and directivity, lower
distortion, and overall smooth frequency response free of high-Q peaks. Wide
coverage angles are achieved without compromise and harmonic distortion
is minimized to allow maximum SPL capability of the compression drivers
without harshness.