Filter
Top Products
General Information
A Synthesis Two or Three installation incorporates a total
of two power amplifiers; one S7150 and one S800. All
seven channels on the S7150 are to be used for driving
the left, center, right, both side, and both rear speakers.
Use the simplified connection diagrams on the following
pages to help you understand how to connect the S7150
amplifier to a JBL Synthesis System. These diagrams are
intended to show the signal flow through the system. For
more detail in making these connections, please refer to
the JBL Synthesis Certified Dealer Installation Manual.
Connect DIN and audio cables between system components,
as shown on the following pages. Make sure that on all
power amplifiers the power switches are in the depressed
(ON) position and that the Auto On/ Manual On switches
are in the Auto On position. Operated in this mode, all of
the components will turn on with one touch of the power
button on the surround processor's remote control.
4.0
INTERCONNECTIONS IN
SYNTHESIS SYSTEMS
13
4.0
CONNECTING YOUR
SYNTHESIS SYSTEM