Filter
Top Products
SPECIFICATIONS
RM10
Description 3-Speaker, 2-way 10" (250mm) vocal monitor
Maximum Recommended Amplifier Power* 175W
Power Handling (Continuous/Peak) 50W/400W
Nominal Impedance 8 Ohms
Sensitivity (2.83V/1m)
92dB
Frequency Response (–3dB)
40Hz – 20kHz
Crossover Frequency 1,700Hz
High-Frequency Transducers Dual 3" (75mm) cones with high-temperature voice coils
Low-Frequency Transducer
10" (250mm) Cone with high-temperature
voice coil, shielded
Baffle Low diffraction, IsoPower
™
Ports Dual FreeFlow
™
flared
Network Straight-Line Signal Path
™
(SSP
™
)
with left and right high-frequency trim controls
Terminals Gold-plated, 5-way binding posts
Dimensions (H x W x D) 13-3/16" x 20-7/8" x 9-5/8" (335mm x 530mm x 245mm)
Weight per Speaker 29.7 lb/13.5kg
Declaration of Conformity
We, Harman Consumer Group International
2, route de Tours
72500 Chateau du Loir
France
declare in own responsibility that the product described in
this owner’s manual is in compliance with technical stan-
dards:
EN 61000-6-3:2001
EN 61000-6-1:2001
Laurent Rault
Harman Consumer Group International
Chateau du Loir, France 10/05
* The maximum recommended amplifier power rating will ensure
proper system headroom to allow for occasional peaks. We do
not recommend sustained operation at these maximum power
levels.
All features and specifications are subject to change without
notice. All dimensions include grilles.
STEAL THE SHOW.
GO PRO
.
™
®
© 2005 Harman International Industries, Incorporated. All rights reserved.
JBL and Harman International are trademarks of Harman International Industries,
Incorporated, registered in the United States and/or other countries.
Part No.
PRE1986
PRO SOUND COMES HOME
™
JBL Consumer Products, 250 Crossways Park Drive, Woodbury, NY 11797 USA
8500 Balboa Boulevard, Northridge, CA 91329 USA
2, route de Tours, 72500 Chateau du Loir, France
516.255.4JBL (4525) (USA only) www.jbl.com
RM10 OM 10/28/05 4:26 PM Page 4