Filter
Top Products
SPEAKER PLACEMENT
In all cases, it is important to
place the speaker with safety
in mind. Always place the
RM10 on a sturdy shelf or
credenza, making sure that no
part of the speaker extends
past the edge of the surface.
The speaker should be placed
out of reach of young children
and pets who might topple it,
resulting in serious personal
injury. All wires should be
placed where they will not
present a tripping hazard.
If that is not possible, cover
the wires completely and
securely with duct tape.
Place the speaker so that the
tweeters (located in the upper
portion of the two side pan-
els) are approximately at ear
height and aimed at the lis-
tening position. When two
speakers are used, place
them equidistantly from
the main listening position.
The RM10 monitor is video-
shielded and can safely be
placed near a television.
The supplied self-adhesive
rubber pads may be attached
to the bottom corners of the
speaker to protect your
furniture.
40
o
– 60
o
Place pads here
THANK YOU FOR CHOOSING JBL
For more than 50 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to
monitoring the recordings
you play in your home, car
or office.
We’re confident that the JBL
loudspeaker you have chosen
will provide every note of
enjoyment that you expect –
and that when you think about
purchasing additional audio
equipment for your home, car
or office, you will once again
choose JBL.
Please take a moment to reg-
ister your product on our Web
site at www.jbl.com. This
enables us to keep you
posted on our latest advance-
ments, and helps us to better
understand our customers
and build products that meet
their needs and expectations.
JBL Consumer Products
WALL AND CEILING
MOUNTING
The RM10 monitor may be
mounted on a ceiling or wall
using appropriate after-market
brackets.
It is solely the customer’s
responsibility to select proper
hardware and to safely install
the loudspeaker. If you are
uncertain of your ability to
safely mount the loudspeaker
on a ceiling or wall, contact a
professional custom installer
for assistance.
The brackets should be capa-
ble of supporting a minimum
weight of 30 lb (14kg). Note
that the two threaded inserts
on the top of each RM10
speaker are 4" (101mm) apart.
Two mounting bolts are sup-
plied. If they are lost or mis-
placed, contact JBL Customer
Service for replacements; do
not use third-party bolts.
When mounting the RM10
speaker from the ceiling, the
bracket should be installed in
a wood joist. Drywall alone is
not strong enough to support
the speaker, and may result in
the speaker falling and seri-
ously injuring someone. Like-
wise, when mounting the
RM10 speaker on a wall, the
bracket should be installed in
a wood stud to prevent falling.
If the RM10 speaker is being
mounted on a brick or con-
crete wall, it is recommended
that expansion anchor bolts
be used.
The RM10 loudspeaker is not
weather-resistant and should
not be installed outdoors or in
a moist area such as near a
pool or hot tub.
RM10 OM 10/28/05 4:26 PM Page 2