Filter
Top Products
6 7
Check the speakers for playback
first by setting the system volume
control to a minimum level, and
then by applying power to your
audio system. Play a favorite
music or video segment and
increase the system volume
control to a comfortable level.
NOTE: You should hear balanced
audio reproduction across the
entire frequency spectrum. If not,
check all wiring connections or
consult the authorized Infinity
dealer from whom you purchased
the system for more help.
When the P52OWS speakers are
used as part of a Dolby Digital or
DTS
®
multichannel home theater
system with a powered subwoofer,
it is recommended that you set
your receiver/processor speaker
mode to “small” or “high-pass”
for all channels connected to
a P52OWS. In addition, some
receivers/processors allow you to
adjust the high-pass frequency for
the “small” or “high-pass” setting.
If your receiver/processor has this
capability, it is recommended that
you set the high-pass frequency to
between 80Hz and 120Hz. Consult
your receiver/processor manual
for more information about these
adjustments.
The placement and setup instruc-
tions in this manual are written in
general terms to cover most typi-
cal installations. We realize that
each room is different and that
your specific installation may
require some modification to these
guidelines. You can be sure that if
you need to install the speakers
outside the guidelines in the man-
ual, they will still deliver excellent
sound with any music or film
soundtrack.
Feel free to experiment with the
Surround Mode Selector Switch to
determine the best settings in your
room with your system.
FINAL ADJUSTMENTS
The P52OWS does not require
any routine maintenance. When
needed, use a soft cloth to remove
any fingerprints or dust.
NOTE: Do not use any cleaning
products or polishes on the cabi-
net or grille.
CARE OF YOUR SPEAKER SYSTEM
P52OWS
Frequency Ranges: 60Hz – 20kHz (±3dB)
Recommended
Amplifier Power Range: 10 – 150 watts
Sensitivity: 87dB
(2.83V @ 1 meter)
Nominal Impedance: 8Ω
Crossover Frequency: 2.3kHz; 12dB/octave
Low-Frequency Drivers: Dual 5" (130mm)
High-Frequency Drivers: Dual 1" (25mm)
Dimensions (H x W xD): 13-3/4" x 11-13/16" x 6-7/8"
(350mm x 300mm x 175mm)
Weight: 12.5 lb (5.7kg)
SPECIFICATIONS
All features and specifications are subject to change without notice.