Filter
Top Products
0-2 ft.
SPEAKER PLACEMENT
Proper placement of your
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of your
loudspeakers. Use these
placement recommendations
as a guide. Slight variations
will not diminish your
listening pleasure.
The Studio Series S-CENTERII
loudspeaker is video-
shielded and can safely be
placed near a television.
The S-CENTERII is designed
to complement all of the
Studio Series loudspeakers.
It is the ideal way to re-create
the cinematic experience in
your home.
The supplied self-adhesive felt
pads may be attached to the
bottom corners of your
S-CENTERII speaker to protect
your television or furniture.
CONNECTION TIPS
SPEAKER CONNECTIONS
– +
Speaker Outputs
CENTER
– +
Speakers and electronics
terminals have corre-
sponding (+) and (–)
terminals. It is important to
connect both speakers
identically: (+) on the speaker
to (+) on the amplifier and (–)
on the speaker to (–) on the
amplifier. Wiring “out of
phase” results in thin sound,
weak bass and a poor
stereo image.
With the advent of
multichannel surround sound
systems, connecting
all of the speakers in your
system with the correct
polarity remains equally
important in order to
preserve the proper
ambience and directionality
of the program material.
To use the binding-post
speaker terminals, unscrew
the collar until the pass-
through hole in the center
post is visible under the
collar. Insert the bare end of
the wire through this hole;
then screw the collar down
until the connection is tight.
The hole in the center of
each collar is intended for
use with banana-type
connectors.