JBL GTS600 Home Theater System User Manual


 
9. Specifications
Specifications
Power Output
(10Hz -50kHz,
14.4V Battery Voltage
Signal to Noise Ratio
Frequency Response
Damping Factor
Line Level Input Sensitivity
(For Rated Power)
Line Level Input
Impedance
Speaker Level Input
Impedance
Speaker Level Input
Sensitivity
Preamp Output Sensitivity
Minimum Speaker
Impedance
Single Ended
(Non-Bridged)
Bridged
Built in Electronic
Crossover Frequency
and Slope
Bass Boost Frequency
and Magnitude
14
GTS300
100 Watts x 2
(4 Ohms, 0.05% THD)
150 Watts x 2
(2 Ohms, 0.08% THD)
300 Watts x 1
(4 Ohms, 0.08% Thd)
100dBA
10Hz - 50kHZ (+0, -1dB)
20Hz - 20kHZ (+0, -0.1dB)
>200
100mV - 4V RMS
(500mV Nominal)
10k Ohms
15 Ohm or 100k Ohm
(Selected By Internal
Jumpers)
200mV - 8V RMS
(2V Nominal)
1V out for 4V
Speaker Level Input
2 Ohms
4 Ohms
18dB per Octave Low Pass
Filter, Frequency Chips
Available from 50-5kHZ
18dB per Octave High Pass
Filter, Frequency Chips
Available from 50-5kHZ
4dB at 40Hz
GTS600
200 Watts x 2
(4 Ohms, 0.05% THD)
300 Watts x 2
(2 Ohms, 0.08% THD)
600 Watts x 1
(4 Ohms, 0.08% Thd)
100dBA
10Hz - 50kHZ (+0, -1dB)
20Hz - 20kHZ (+0, -0.1dB)
>200
100mV - 4V RMS
(500mV Nominal)
10k Ohms
15 Ohm or 100k Ohm
(Selected By Internal
Jumpers)
200mV - 8V RMS
(2V Nominal)
1V out for 4V
Speaker Level Input
2 Ohms
4 Ohms
18dB per Octave Low Pass
Filter, Frequency Chips
Available from 50-5kHZ
18dB per Octave High Pass
Filter, Frequency Chips
Available from 50-5kHZ
4dB at 40Hz