Filter
Top Products
10
† The Peak Dynamic Power is measured by recording the highest center-to-peak voltage
measured across the output of a resistive load equal to minimum impedance of the
transducer, using a 50Hz sine wave burst, 3 cycles on, 17 cycles off.
CS480
S
ATELLITES
Frequency Response (–6dB): 110Hz – 20kHz
Recommended Amplifier Power Range: 10 – 100 Watts
Sensitivity (2.83V @ 1 meter): 86dB
Nominal Impedance: 8 Ohms
Crossover Frequency: 3.0kHz; 12dB/octave
High-Frequency Driver: 1/2" (13mm) Titanium-laminate dome, magnetically shielded
M
idrange Driver:
3
-1/2" (89mm), magnetically shielded
Dimensions (H x W x D): 6" x 6-3/8" x 3-7/8" (152mm x 162mm x 98mm)
Weight: 2.0 lb (0.9kg)
CENTER
Frequency Response (–6dB): 100Hz – 20kHz
Recommended Amplifier Power Range: 10 – 100 Watts
Sensitivity (2.83V @ 1 meter): 88dB
Nominal Impedance: 8 Ohms
Crossover Frequency: 3.0kHz; 12dB/octave
High-Frequency Driver: 1/2" (13mm) Titanium-laminate dome, magnetically shielded
Midrange Driver: Dual 3-1/2" (89mm), magnetically shielded
Dimensions (H x W x D): 5-1/4" x 11-3/8" x 3-3/8" (133mm x 289mm x 86mm)
Weight: 3.2 lb (1.5kg)
SUBWOOFER
Frequency Response (–6dB): 35Hz – 160Hz
Amplifier: 125W RMS/250W Peak
†
Driver: 8" (200mm)
Dimensions (H x W x D, including feet): 16-1/4" x 12" x 13-5/8" (413mm x 305mm x 346mm)
Weight: 29 lb (13.2kg)
SPECIFICATIONS
CS 480-120V om.qxd 12/15/06 4:43 PM Page 12