Filter
Top Products
14
jbl On TIME 200iD UsEr GUIDE
TrOUblEsHOOTInG
ChARgINg AND SYNCINg
Symptom Possible Problem Solution Note
iPod will not charge Wrong adapter is used Make sure correct adapter is used for your specific
iPod model.
The iPod is not making full contact with
the docking station
Make sure the iPod is seated securely into the
docking station.
iPod is not recognized by the
computer when docked into
the JBL On Time
™
200ID unit,
or there is an error in data
transfer
Third-party accessories may be conflict-
ing with the USB signal
USB port is not supplying enough power
Make sure you do not have the JBL On Time 200ID
unit connected to a USB hub; connect the unit
directly into the computer’s USB port.
Try connecting the USB cable to another port on the
back of the computer.
Symptom Possible Problem Solution Note
Clock is not set to correct time Incomplete setup Be sure to follow the clock setting procedure
through, to the end. A confirmation screen will be
displayed when set completely.
JBL On Time 200ID unit does
not retain memory settings
when there is a power outage,
or if the unit is unplugged
There are no batteries installed in
the unit
Batteries may be low
Make sure you install three AAA batteries in the
base of the JBL On Time 200ID unit.
If you have installed three AAA batteries, replace
them, as they may be defective.
ClOCK SEt AND ClOCK MEMORY
0024CSK - JBLOnTime200iD v10.indd 14 14/05/08 12:07:42