Filter
Top Products
6
GB
CN
CN
JP
KR
TH
MA
7
Jabra BT 5020 Bluetooth headset
GB
CN
CN
JP
KR
TH
MA
Specications
:
• Talk time up to 10 hours/standby time up to 300 hours
• Rechargeable battery with charging option from AC power supply, PC via
USB cable or car charger (not included)
• Weight 16 grams
• Battery indicator
• Operating range up to 33 feet (approx. 10 meters)
• Headset and hands-free Bluetooth profiles
• Bluetooth specification (see glossary) version 2.0
4. Getting started
The Jabra BT5020 is easy to operate. The answer/end button on the headset
performs the different functions depending on how long you press it.
Instruction: Duration of press
Tap Press briefly
Double Tab 2 quickly repeated Taps
Press Approx: 1 second
Press and hold Approx: More than 3 seconds
1) Charge your headset
Make sure that your Jabra BT5020 headset is fully charged before you start using it.
Use the AC adapter to charge from a power socket, or charge directly from your PC
with the USB cable provided. Connect your headset as shown in fig. x. When the
LED is solid red, your headset is charging. When the LED is green, it is fully charged.
Please note: The lifetime of the battery will be significantly reduced if your
device is left uncharged for a long period. We therefore recommend that you
recharge your device at least once a month.
2) Turning your headset on and o
• Press the on/off/pairing button to turn on your headset. The LED will
show a green flash when the headset is on.
• Press and hold the on/off/pairing button to turn off your headset. The
LED will turn red when headset is off.
3) Pair it with your phone
Before you use your Jabra BT5020, you need to pair it with your mobile
phone. The rst time you turn on your Jabra BT5020 it will automatically
go in to pairing mode. If you wish to pair again at a later date, follow the
instructions below. (Follow step 1-4 in g 3).
A. Put the headset in pairing mode
• Make sure the headset is o .
•
Press and hold the answer/end button until a solid blue light comes on.
B. Set your Bluetooth phone to ‘discover’ the Jabra BT5020
Follow your phone’s instruction guide. This usually involves going to a
‘setup,’ ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the
option to ‘discover’ or ‘add’ a Bluetooth device.* (See example from a
typical mobile phone in g. 3)
C. Your phone will nd the Jabra BT5020
Your phone then asks if you want to pair with it. Accept by pressing ‘Yes’
or ‘OK’ on the phone and conrm with the passkey or PIN = 0000 (4 zeros).
Your phone will conrm when pairing is complete. In case of unsuccessful
pairing, repeat steps 1 to 3.
5. Wear it how you like it
The Jabra BT5020 is ready to wear on your right ear. If you prefer the left,
gently rotate the ear piece to fit left ear. See fig. 4.
For optimal performance, wear the Jabra BT 5020 and your mobile
phone on the same side of your body or within line of sight. In general,
you will get better performance when there are no obstructions
between your headset and your mobile phone.
6. How to...
Answer a call
• Tap the answer/end button on your headset to answer a call.
End a call
• Tap the answer/end button to end an active call.
Make a call
• When you make a call from your mobile phone, the call will (subject to
phone settings) automatically transfer to your headset. If your phone does
not allow this feature, tap on the Jabra BT5020’s answer/end button to
transfer the call to the headset.
Reject a call*
• Press the answer/end button when the phone rings to reject an incoming
call. Depending on your phone settings, the person who called you will
either be forwarded to your voice mail or hear a busy signal.
Activate voice dialling*
• Press the answer/end button. For best results, record the voice-dialling tag
through your headset. Please consult your phone’s user manual for more
information about using this feature.