Filter
Top Products
US
supplied USB cable to the port marked on the
Jabra PRO base.
2. Connect the other end of the USB cable to any free
USB port on your computer.
Step 7: Enable your softphone interface
1. Insert the CD-ROM included with your headset into
your PC and install the Jabra PC Suite software.
The softphone part of the setup wizard will prompt
you to do this.
The installation includes the supported softphone
drivers necessary to enable the softphone interface.
If you have any questions as you work through the
setup wizard, or if you would like to learn more
on how to use the many advanced features of
your headset solution, please refer to the full user
manual. This is included on the CD-ROM in PDF
format.
2. Right-click on the Jabra icon in the Windows
Notification Area and select Open Device Service.
The Jabra Device Service window opens. This
shows the list of softphone drivers installed on your
PC. Use the online help available in this window to
learn more.
3. Select the softphone you want to use (target
softphone) from those available in the Select
softphone for outgoing calls drop-down list.
4. Run the Jabra Control Center — click on the
Windows Start button and select All Programs >
Jabra > Jabra PC Suite > Jabra Control Center.
5. Select the Softphone tab for your Jabra PRO device.
6. In Target softphone for outgoing calls, select
either Microsoft Office Communicator or
Softphones supported by Jabra PC Suite.
Configure other parameters, as required.
This establishes the default softphone target type.
Use the online help available in this window to
learn more.
Step 8: Connect to your mobile phone
The setup wizard asks whether you want to connect
to a mobile phone and guides you through the
procedure:
1. You must ensure that Bluetooth is active on your
phone and then put it in pairing mode.
Your phone looks to see if any nearby Bluetooth
devices are advertising themselves for pairing.
2. Use your phone’s controls to identify and select the
“Jabra PRO 9470” device. Your phone might also ask
for the headset’s pass code. The pass code for all
Jabra devices is 0000 (four zeros).
Your phone tries to pair with and connect to the
base.