Filter
Top Products
What you see
What you hear
Status
Flashes every second
Flashes every 3
seconds
When Active Mode
starts: quick series
of TWO tones – low
to high pitch
When Standby
Mode starts: quick
series of TWO
tones – high to low
pitch
Active Mode
• Call in progress
• Up to 4 hours of talk time
Standby Mode
• Waiting for call
• Up to 100 hours of standby time with
mheadset in multi-adapter
ST
ATUS INDICATORS
To answer and end calls with only the headset:
Some phones enable you to answer or end a call by pressing and releasing without having
to touch the phone. For all Nextel phone models (except the i1000), the phone’s Automatic
Answer feature needs to be activated for this headset feature to work.
For the BlackBerry 6510, FreeSpeak's Anwer/End feature has to be turned on.
To turn on FreeSpeak's Answer/End feature:
1) Ensure that the AC power adapter is not connected.
2) Put the headset in the multi-adapter.
3) Use the stylus to press the stylus switch for about 12 seconds.
4) You will then see a number of blinks (long flashes) on the multi-adapter indicator
light which tell you whether this feature is enabled or disabled according to the
following table:
5) Repeat steps 1-4 to switch between enabled and disabled settings.
If you are enabling Answer/End feature for the first time, you should test answering and ending
calls to ensure that your phone supports this feature.
For more information, see “Enhanced Features” at www.jabra.com/fscs.
Calls can be ended by the headset only by waiting for the line to disconnect.
Number of Blinks
Answer/End Feature Comments
4
5
Enabled
Disabled
Default Setting
--