Filter
Top Products
EN
7
Copyright © 2007 Iqua Ltd
one phone at a time. Once it is paired with 8 phones, the 9th paired device will replace the 1st
paired device.
1. When the headset is powered off, press and hold the Multifunction -button until you can
hear two high sounds and the green light starts flashing rapidly.
2. Release the button. BHS-333 is now in pairing mode, waiting for your mobile phone to
contact it.
3. Complete the pairing with your mobile phone. Please refer your mobile phone manual for
details on how to search and pair. When phone has found the headset, it will show Iqua
BHS-333 on its screen. In order to pair with the phone, enter the PIN code 0000.
4. After pairing, BHS-333 will automatically connect to your mobile phone. After pairing, some
phones do not automatically connect to the headset. If this is the case, please ensure that
you connect the phone to the headset (please refer to your mobile phone manual). Once
pairing and connection are completed, the green light flashes twice every 5 seconds.
If the headset is turned on within 10 meters from several paired phones, the headset will try
to connect to the last connected phone within 10 seconds. If the headset does not connect to
the last connected phone (for example, the paired phone is turned off or it rejects the
connection), the green light will be flashing once every 3 seconds indicating it is powered on
but there is no Bluetooth connection.
* For latest compatibility information please visit www.iqua.com
Disconnecting BHS-333 and your phone
Easiest way to disconnect BHS-333 and you phone is simply switch off the BHS-333.
BHS-333_Headset_UG_EN.fm Page 7 Wednesday, April 25, 2007 12:39 AM