Filter
Top Products
Operation - GBMA201
Step 1 – Turn OFF
Turn OFF both audio transmitter and headphones
Step 2 – Inquiry Mode
Press and hold the ON/OFF button on the transmitter for approximately 6 seconds to invoke inquiry
mode.
Step 3 – Turn ON
Turn ON Bluetooth headphones by pressing the Center button for 6 seconds. If using non-IOGEAR
headphones, consult your manual for instructions.
Step 4 – Auto-Connect
The transmitter will now begin searching for Bluetooth headphones within range and connect to the
closest one. Please be patient as it may take 60-120 seconds for both devices to connect.
Step 5 – Finished
When the blue LED becomes solid on both devices, this indicates successful connection
12
If you encounter problems, please consult the troubleshooting section of this manual.