Filter
Top Products
Simpli Digital Inc. Media Center Amplier User’s Guide
4
2. Next, connect the USB cable from the Windows Media
Center to the Media Center Amplier using the supplied USB
cable. Connect the narrow rectangular side (labeled 1 below)
of the USB cable to any available port on the Windows
Media Center. Connect the square side (labeled 2 below) to
the Media Center Amplier.
USB Cable
3. If desired, connect the AC power cord from the Windows
Media Center into the AC power outlet on the back of the
Media Center Amplier. This is not a mandatory connection
for the amplier to operate properly.
4. Connect your powered subwoofer line level input(s) to the
SUB OUT jack on the Media Center Amplier using an RCA
cable (not supplied). Many subwoofers have two inputs, so
refer to instruction manual supplied with the subwoofer for
single input connections.
5. Connect your speakers to each labeled speaker connector
on the Media Center Amplier. Make sure each speaker’s “+”
terminal connects to corresponding amplier’s “+” terminal.
The orientations for left and right speaker placement are with
respect to watching the television screen.
1
2