Insignia NS-SBAR Home Theater System User Manual


 
6
NS-SBAR/NS-SBAR-A Soundbar Home Theater System
www.insigniaproducts.com
3 Turn on your subwoofer.
Connecting power
To connect power to your soundbar:
1 Connect the power supply to the power supply
jack on the soundbar.
2 Connect one end of the AC power cable to the
power supply and then plug the other end into
a power outlet. The standby indicator on the
soundbar turns on.
Installing the wall mount bracket
You can use the included wall mount brackets (A
and B) to mount this soundbar on a wall.
To install the soundbar on a wall:
1 Secure bracket parts A to the soundbar with
screws (included).
2 Use the bracket template to determine position
on wall for bracket parts B. Secure bracket parts
B to the wall with four screws (not included). You
must use suitable wall anchors if you are
mounting on drywall, concrete, or other wall
types.
3 Fit the soundbar to the wall by sliding it down
and making sure of a secure fit between bracket
parts A and B.
Installing the soundbar feet
If you do not mount the soundbar to a wall, you will
need to attach the feet (included) to the soundbar,
so that it will sit evenly on a flat surface.
To install the soundbar feet:
1 Turn the soundbar over.
2 Remove the protective paper from the
soundbar feet (2) to reveal the adhesive strip.
3 Align the posts on the soundbar feet with the
holes in the bottom of the soundbar, then press
the soundbar feet onto the bottom of the
soundbar
Using your soundbar
Turning on the power
Press the Power button on the top of the unit or
press the Power button on the remote control to
turn on the soundbar.
Press the Power button on the top of the unit or
press the Power button on the remote control to
put the soundbar in Standby mode.
Adjusting the Volume
Press the Volume Up button to increase the
volume or the Volume Down button to decrease
the volume.
- Or-
Using the remote control, press the Volume +
button to increase the volume or the Volume –
button to decrease the volume.
Note
With the Rocketboost Ready card accessory installed
(sold separately), you can use Rocketboost to
connect to a Rocketboost enabled subwoofer. See
“Using Rocketboost” on page 7, for more
information.
Warning
Improper installation can result in serious injury or
damage to your soundbar. If necessary, please seek
the assistance of a professional.
A
A
A
Wall
BB
Wall
Soundbar
B
A
B
A
Wall
Soundbar
B
A
Soundbar
Soundbar foot
Soundbar foot
NS-SBAR_11-0299_MAN_V4.book Page 6 Thursday, March 31, 2011 7:49 AM