Insignia NS-DA1G CD Player User Manual


 
2.
In the Audio menu, select
Repeat
, then press (Next) or (Play/Pause).
3.
Press (Up) or (Down) until you select
All
(repeat all tracks),
One
(to repeat a single
track), or
Off
.
4.
Press (Next) or (Play/Pause) to save your setting. The Repeat 1 or Repeat All icon
appears on the Now Playing screen next to the battery icon.
Repeating segments of a track
You can use A-B repeat to repeatedly play a segment of a track. You must first enable A-B
repeat.
To enable A-B repeat:
1.
Press (Menu). The main menu opens.
2.
Press (Up) or (Down) to highlight
Settings
, then press (Next) or (Play/Pause).
3.
Press (Up) or (Down) to highlight
Audio
, then press (Next) or (Play/Pause).
4.
Press (Up) or (Down) to highlight
A-B repeat
, then press (Next) or
(Play/Pause).
5.
Press (Up) or (Down) to highlight
On
or
Off
, then press (Next) to select. The
message "Use the down button (V) to activate A-B" appears, then the Audio Setting
menu opens again.
6.
Press (Menu) to return to the Now Playing screen.
To repeat an audio segment:
1.
During playback, press (Down) to mark the start of the playback loop. The Repeat icon on the
display shows an "A."
2.
Press (Down) again to mark the end of the playback loop. The Repeat icon on the display
shows an "AB" and the player repeats that audio segment indefinitely.
3.
Press (Down) again to cancel the repeating loop.
Using the equalizer
Six equalizer settings are available, and five are preprogrammed: Normal, Rock, Jazz, Classic,
and Pops. The User setting lets you customize the equalizer to your preference.
To select a pre-programmed equalizer setting:
1.
In the Settings menu, select
Audio
, then press (Next) or (Play/Pause).
2.
In the Audio menu, select
Equalizer
, then press (Next) or (Play/Pause).
3.
Press (Up) or (Down) to select the equalizer setting you want.
4.
Press (Next) or (Play/Pause) to save your new settings.
To change the equalizer's custom setting:
1. In the Settings menu, select
Audio
, then press (Next) or (Play/Pause).
2.
In the Audio menu, select
Equalizer
, then press (Next) or (Play/Pause).
3.
Press (Up) or (Down) to select the
Custom
setting.
4.
Press (Next) to move the cursor to the first equalizer setting dial.
5.
Press (Up) or (Down) to adjust the setting. Repeat this step to adjust each
remaining dial.
Pa
g
e 11 of 23
11/8/2006file://C:\Documents and Settin
g
s\Administrator\Deskto
p
\D2\Best Bu
y
\Insi
g
nia\DOCUME...