Infinity QPS1 Speaker System User Manual


 
Infinity QPS-1 – Owner’s Manual
7
CARE OF YOUR SPEAKER SYSTEM
The QPS-1 cabinet does not require any routine maintenance. When cleaning is needed,
first make sure power is off, and then use a soft cloth, pre-dampened with a solution of
mild detergent and water, to remove any fingerprints or to wipe off dust. DO NOT USE
ANY OTHER CLEANING PRODUCTS OR POLISHES.
The metal grille can be cleaned with gentle vacuuming.
TROUBLESHOOTING
S
YMPTOM
C
AUSE
S
OLUTION
No sound Power is off See A/V preamplifier
or receiver owner’s
manual for operation
and further help
Speakers not connected Connect speakers
(see pages 5 and 6)
Distortion with Defective A/V preampli- Repair defective AV
volume control fier or receiver preamplifier or receiver
near minimum
Shorted speaker wires Check or repair wiring
(see pages 5 and 6)
Distortion on music Dynamic soundtrack Turn down master
peaks or sound (e.g., explosions) volume control to
effects (e.g., pops causes speaker lower overall range
or rapping noise) to “bottom out”
Tone controls Set bass and treble flat;
are set too high use controls sparingly
Buzz, hum or Connecting wires Connect wires only
crackle when with power on causes when audio system
connecting wires transient signal spikes power is off
Buzz or hum when Grounding problem See A/V preamplifier
A/V preamplifier or or receiver owner’s
receiver is on manual for operation
and further help