Filter
Top Products
Compositions Overture OVTR 1 – Owner’s Manual
◆
2
3-
WAY
B
OOKSHELF
S
PEAKERS
W
ITH
I
NTEGRATED
P
OWERED
S
UBWOOFERS
...
A
BOUT
T
HIS
M
ANUAL
...
P
ARTS
L
IST
...
T
OOLS
A
ND
S
UPPLIES
(N
OT
E
NCLOSED
)...
INTRODUCTION
The Infinity Compositions Overture OVTR 1 speaker system is a super-compact, 3-way, full-
range bookshelf or stand-mounted speaker with an integral powered subwoofer. The OVTR 1
is ideal for use where space is at a premium. With its wide bandwidth and uniform response,
it excels in the accurate reproduction of music, but its high efficiency and ability to produce
realistic sound levels with minimal amplifier power make it equally suited for use in the finest
home theater system.
To start enjoying your new pair of Compositions Overture OVTR 1 speakers, first read and then
perform all instructions listed in this manual, as well as those found in the owner’s manuals of
associated components in your audio system. Also, please read the enclosed Important Safety
Instructions for detailed safety precautions. Save all instructions for future reference. These
speakers are covered by a limited five-year warranty (see the back cover), so save the bill of sale
to protect your purchase and aid in any service-related questions.
UNPACKING THE SPEAKERS
Finish unpacking the speaker box. Be careful lifting the speakers, since they are heavier
than they appear. If you suspect damage from transit, report it immediately to your dealer
and/or delivery service. Keep the shipping cartons and packing materials for future use.
Open the accessory pack and verify the following contents:
◆
(2) Molded Feet (For Vertical Placement)
◆
(4) Small Self-Adhesive Feet (For Horizontal Placement)
◆
(4) Large Self-Adhesive Feet (For Horizontal Placement)
◆
(2) Grilles
◆
(4) Spare 2AG 3A SB 250V Fuses
◆
Owner’s Manual (P/N 331214-001) and Warranty Registration Card
You may also need the following tools and supplies:
◆
High-quality speaker wire (also see Wiring The System on page 6)
◆
Wire strippers
◆
Small flat-blade screwdriver (for fuse replacement, if needed)
◆
Spade terminals (optional)
Overture 1-120V OM 9/11/98 4:30 PM Page 1