Filter
Top Products
Compositions Overture OVTR 1 – Owner’s Manual
◆
10
P
ERFORMANCE
D
ATA
D
RIVE
U
NITS
A
MPLIFIER
(B
UILT
-
IN POWER AMPLIFIER FOR
LOW
-
FREQUENCY SECTION
)
D
IMENSIONS
(also see inside front cover)
SPECIFICATIONS – OVTR 1
Frequency Range: 35 ~ 20,000Hz
Sensitivity: 92dB spl @ 1 m/2.83 V (anechoic conditions)
Impedance: 8
Ω nominal
Maximum Peak Output: 108dB (spl on program)
Amplifier Requirements: Recommended for use with amplifiers
10 ~ 100 W (@ 8
Ω)
Low Frequency: One 8" (200 mm) high-efficiency,
ultra-linear, long-throw, magnetically-
shielded woofer
Mid Frequency: Two 4" (100 mm) high-efficiency,
magnetically-shielded,
mid-range drivers
High Frequency: One 1" (25 mm) soft-dome, high-efficiency,
neodymium magnet, magnetically-
shielded tweeter
Crossover Frequencies: 300 and 3,000Hz
Peak Output: 250 VA
Power Supply: 120 V~ 60Hz
Power Consumption: 150 W (maximum), 7 W (standby)
Width: 5
3
⁄
4
" (146 mm)
Height: 12
1
⁄
2
" (318 mm)
Depth: 12
1
⁄
2
" (318 mm)
Weight: 28.5 lb or 12.95 kg (each)
Declaration of Conformity
We, Infinity Systems A/S
Kongevejen 194B
DK-3460 Birkerød
DENMARK
declare in own responsibility, that the product described
in this owner’s manual is in compliance with technical
standards:
EN 55 013/6.1990
EN 55 020/6.1988
EN 55 022/6.1993
EN 60 065/1994
EN 60 555-2-3/1987/88
Steen Michaelsen
Infinity Systems A/S
Birkerød. DENMARK. 5/97
Overture 1-120V OM 9/11/98 4:30 PM Page 9