Filter
Top Products
4
SPECIFICATIONS
Outrigger Speakers
Frequency Response..................................60 Hz ~ 20 kHz
Crossover Frequency .............................................3.2 kHz
Sensitivity......................................88 dB @ 2.8 V, 1 meter
Nominal Impedance....................... compatible with 8 ohms
Power Rating........................................10 ~ 80 watts (rms)
Drivers ......5
1
⁄4" polypropylene cone w/ rubber surround woofer
.................................................1" Polycell™ dome tweeter
Cabinet Finish...........................................................white
Cabinet Dimensions* ...............8" wide x 10" high x 7" deep
....................20.3 cm wide x 25.4 cm high x 17.8 cm deep.
.......................................................* Not including bracket
IN CASE OF TROUBLE
Before consulting your dealer, Infinity service facility or factory
service department, you can perform simple troubleshooting. If
the sound quality is distorted, listen to each speaker separately
to check if the fault is present in both. If it is, then the trouble is
likely to be elsewhere in your system. If the fault is in one
channel only, switch the left and right speaker leads at the
receiver. If the distortion moves to the other speaker, the fault
is not in the speaker.
If there is no authorized service facility near you, write or
phone the Service Department, Infinity Customer Service,
20630 Nordhoff Street, Chatsworth, CA 91311, (818) 407-
0228, and describe the problem as specifically as possible.
The service department will advise you what action to take.
Note: Do not ship any parts or whole speakers for service without
prior approval (“Return Authorization”), and do not ship without
enclosing a copy of your original bill of sale and a description of
the problem.