Filter
Top Products
Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.
MENU OVERVIEW
1 COPY Use this function to make a CD/DVD copy. Before you start use this function
,
please make sure you place the
correct reading source and blank discs. The
system will automatically detect and display how many blank discs are
detected. When the system is ready, just place OK to
execute CD/DVD
copies.
2 TEST This is copying process simulation function
. The process is the same as
COPY, but it won’t
write anything to the recordable disc. The purpose of this
process is to ensure an error free duplication.
3 COPY&VERIFY This operation will make copies and
after the copy process has been finished,
it will continue a Verification process automatically
to ensure data
correctness.
4 COPY&COMPARE This operation will make copies,
and after copy process has been finished, it
will continue a Comparison process automatically to ensure data correctness.
5 VERIFY
Use this function to make Disc Readability Check
. This operation will check
your master discs and the copied discs’
readability to make sure all of your
copies are readable.
6 COMPARE DISC
Use this function to make a bit-by-bit Comparison between the
Master
Reading Source and all the copied discs inside the writer trays
. This operation
is to ensure all of your copies have the same exact
information as your Master
Reading Source.
7 SET BURN SPEED
This operation will allow you to adjust and select Duplication Speed for
three
different disc types (CDs, audio CDs, and DVDs).
8 SELECT SOURCE
To set the Master Reading Source as Optical Drive or Hard Drive Disk.
9 AUDIO TRACK EDIT
This is to make Audio Tracking Selection. This will help you to
combine
audio tracks from various CDs into a single customized audio CD.
UTILITY
10.1 Pre-scan
This feature will help to check whether the Master Source Disc can be
correctly duplicated.
10.2 Quick Erase This operation will erase your re-writable discs in the Writer Tray.
10.3 Full Erase This operation will completely erase your re-
writable discs in the Writer Tray. It
takes longer time than Quick Erase.
10.4 Eject All Disc Eject all discs, including master source disc and all of disc in writer tray.
10.5 Disc Info. This feature will allow you to check disc’s basic information such as
disc type,
data length, and available space
10
10.6 Drive Info. This feature will allow you to check the duplicator’
s major component
information, such as the manufacturer, Writer or Reader model numbers
and
versions.