Filter
Top Products
Copyright © 2005 by ILY Enterprise, Inc. All Rights Reserved.
OPERATING GUIDE
7. SELECT SPEED
This operation will allow you to adjust and select the Duplication Speed for the three different disc types: CD,
Audio CD, and DVD.
a. Press either button , to navigate the menu. 7. SELECT SPEED, and press OK
b. You will see three disc types: CD, Audio CD, and DVD. Press either button , to select a disc type and
press OK to confirm your selection.
c. Press either button , to select the burning speed.
[Burn Speed] 7.Set Burn Speed
Press OK
&
,
CD = 52
Press
OK
Setting normal
data CD
burning speed
[Burn Speed]
,
Audio CD = 40
Press
OK
Setting Audio
CD burning
speed
[Burn Speed]
,
DVD = 8
Press
OK
Setting DVD
burning
speed
Note: This is only
available on DVD
duplicators
8. SELECT SOURCE
Use this function to set a Optical Drive or Hard Drive Disk as the Master Reading Source.
a. Move to 8. Select Source and press OK.
b.
Press , to select either a HDD or an Optical Drive with assigned number as the reading source.
Source Drive ==> 8.Select Source
Press OK
HDD:ST380021A
Source Drive ==>
move,
to select
D#1:DVD-ROM
Press OK to
finished setting
Note: If HDD was selected as Source, then please follow 12.1 Select Image ‘s instructions to learn how to
select image files as your reading source..
Note: Each Optical Drive will be assigned a Drive # according to their installation sequence. If there is no
HDD installed, then Drive#1 is set as the Reading Source.