Filter
Top Products
Stereo Audio System for Your iPod V11M11_IM_EN_12082006
www.i-Luv.com
- 22 -
OPERATIONAL INSTRUCTIONS
Example (TX Mode): If you have a Stereo Headset with Bluetooth technology (Mono will not work, only stereo headphone with A2DP Bluetooth
profile will work) , you can set the BluePin
TM
to Transmit(TX) the music that is currently playing on i277 to the headphone.
NOTE: Certain Headsets with Bluetooth technology are not compatible with the BluePin
TM
, please check with your dealer for compatibility. The
best product for this operation is iLUV Stereo Headset with Bluetooth technology, which is fully compatible with BluePin
TM
. Devices with Bluetooth
technology you are trying to pair MUST support A2DP Profile.
7. To pair with cell phones, PDA, or other devices with the BluePin
TM
(RX Mode):
• First connect the BluePin
TM
to i277’s BluePin
TM
port.
• Push and hold the pairing button until button displays blue and red light flashing.
• From your cell phone or other devices, go to Bluetooth setup in the devices menu. Depending on the devices menu will differ.
• Do a search for devices, when initiated your device will look for any devices with Bluetooth technology in the area.
• When the search is done you will see a device named RX-I110. Select the device and your device will prompt for password.
• The default password for our BluePin
TM
unit is “0000”, enter password and your device will let you know if pairing was successful.
• Once connected, you will be able to play the songs from MP3 cell phones or other devices with Bluetooth technology and hear it from
our i277 unit.
• You can use the PLAY/PAUSE, PREV, NEXT buttons of i277 to remote control the MP3 cell phones or other devices that support
AVRCP profile.
Note: Depends on the device these functions might be disabled due to software issues.