Filter
Top Products
Noise-Canceling Headset w/ Bluetooth wireless technology V10M10_IM_EN_12072006
www.i-Luv.com
- 11 -
Multi-function
button
OPERATING INSTRUCTIONS
Turning On/Off the i913
To turn on the i913, follow the instruction below:
Please find the on/off switch located on the left earpiece.
Three way Switch functions:
(Position 1) OFF: Headset is off
(Position 2) Bluetooth: Bluetooth is in standby mode
(Position 3) N/C On: Noise Canceling feature Activated
To Enable Bluetooth Feature on i913 Headset:
Once the Headset is set to standby mode, you could activate the Bluetooth by pressing
and holding the Multi-function button on the headset for approximately three (3)
seconds. The i913 headset will make a high-pitched beep. Followed by blue blinking light,
indicating the device has been turned on.
To turn off the i913’s Bluetooth feature or go into standby mode
Standby mode:
Press and hold the Multi-function button for five (5) seconds, then you will hear a beep
followed by red light flashing four times
OFF Mode:
You could simply use the On/Off button on the headset.