Filter
Top Products
Ear Clip Headset w/ Bluetooth wireless technology V10M10_IM_EN_11082006
www.i-Luv.com
- 10 -
OPERATING INSTRUCTIONS
Pairing i212 – Continued
6. Enter the password: “0000.” The phone or device will
display a confirmation message after a few seconds. Once
the headset is correctly paired, the light will stop blinking
red and blue alternately, and will blink blue only.
7. Repeat this procedure each time an additional phone or
audio device needs to be paired with the i212.
8. Enjoy music and
answer calls
wirelessly using the
i202.
Notes on Pairing
Be aware that in order to answer and place calls while listening to music, the i212
must be paired with a mobile phone BEFORE it is paired with audio devices or the
audio adapter.
This headset will not be recognized by your mobile phone unless it is properly paired.
The i212 cannot pair with mobile phones which are not designed with Bluetooth
wireless technology. It is important to follow both these instructions and those which
accompany the corresponding mobile phone or audio device.
The i212 can also be paired with a computer which supports Bluetooth wireless
technology. For pairing instructions for such a computer, consult the owner’s manual
for the computer or see a computer specialist.
The i212 is designed to remember pairing information even when it is turned off.
However, this feature only works if the corresponding mobile phone is designed with
the same feature. Consult the owner’s manual of the mobile phone or audio device
for these design features.
The i212 can only be paired with two devices at the same time; one with the mobile
phone and the other with an audio device or the supplied wireless audio transmitter.
Attempting to pair the i212 with a third device will result in the loss of the previous
pairing connection.