Filter
Top Products
Playing a CD or CD+G Disc
8
1. Press the Power Button to turn the unit on.
2. Load the CD+G or CD disc into the unit using the CD Door on the back of the
unit.
3. Adjust the AUX/CDG/iPod Dial to CDG.
4. Press the Play/Pause Button to play and pause the loaded disc. Press the Stop
Button to stop the disc.
5. Press the Skip/Search Buttons to skip from one track to the next or to previous
tracks. Press and hold the Skip/Search Buttons to search through an individual
CD track.
The Search functionality will not work with a CD+G disc.
6. Before singing along with a CD+G or CD disc, plug in the microphone and turn
the Microphone On/Off Switch to the On position.
If feedback noise is present, move the microphone away from the unit and/or
reduce the microphone’s volume.
7. Adjust the Volume Dial to set the volume of the speakers. Adjust the
Microphone Volume Dial to set the volume of a plugged in microphone.
8. Use the AVC Dial to adjust the balance between the music and the recorded vocal
volume when singing into the microphone.
9. When singing with a CD+G karaoke disc, turn the Music/Karaoke Dial to
Karaoke. When singing with a CD, turn the Music/Karaoke Dial to Music and
use the AVC Dial to adjust the balance between the music and vocal. In Music
Mode the CD audio track’s vocals can not be cut out completely even if the AVC
Dial is set to max.
10. Press the Repeat Button on the remote once to repeat an individual song. Press
the Repeat Button on the remote twice to repeat an entire album.
11. When singing with a CD, turn the Echo Dial to adjust the echo effect added to the
audio from the microphone.
12. Plug headphones (not included) into the Headphone Output to disable the stereo
speakers, and listen to the CD+G in private.