Hitachi UR 18DSL Radio User Manual


 
8
To turn the voice messages on/o
By factory default setting, the voice message function
plays “Welcome to Hitachi Power To ols” when the
power is turned on and “Presented by Hitachi Power
Tool s” when the power is turned o .
To mute the voice messages, press memory button 1
while the power is turned o and
display [OFF] on the
display panel.
To restore the voice messages, press memory button
1 while the power is turned o and display [ON] on the
display panel.
MAINTENANCE AND INSPECTION
WARNING
When not in use or during inspection and maintenance,
be sure to remove the AC plug, rechargeable battery
and backup batteries.
Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do so
could result in serious hazard.
Cleaning on the outside
When the radio is stained, wipe with a soft dry
cloth or a cloth moistened with soapy water.
Do not use chloric solvents, gasoline or paint thinner,
for they melt plastics.
Storing the Radio
Do not store the radio in the following places.
Within reach of or easily accessible to children
In humid or dusty places
In high temperature such as inside a car or exposed
to direct sunlight
In extremely cold places or directly exposed to cold
draughts
Where the
temperature changes drastically
Where it is exposed to smoke or steam such as near
a cooking appliance or humidier
Service parts list
CAUTION
Repair, modication and inspection of Hitachi Power
Tool s must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the tool to
the Hitachi Authorized Service Center when requesting
repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modied to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.
NOTE
Due to HITACHI’s continuing program of research and
development, the specications herein are subject to
change without prior notice.