Filter
Top Products
Software version
Use the MENU, and SELECT buttons to choose Software Version.
This will display the version of software that has been
used in your radio.
Manual tune
Use the MENU, and SELECT buttons to choose the Manual Tune Menu.
Press the and buttons to see the different channels
that are available.
When you see the channel you want to use, press the
SELECT button. The
Signal
Strength
Meter
will appear:
The open bar in the middle of the meter shows you the
minimum signal strength needed for good DAB reception.
The number of grey bars will increase and decrease,
showing you the changing signal strength as you adjust
the aerial and radio position.
To turn off the Signal Strength Meter, press the
SELECT button again.
Note
– You can turn on the Signal Strength Meter any time whilst in
DAB mode,
simply by pressing the
SELECT button.
page 11
signal strength low
signal strength OK
Factory reset
To return the radio to its factory settings, with all stations and presets cleared:
Press the
MENU button and hold it in for two seconds.
The LCD screen will display a message asking if you really want to do this. To
confirm, press the SELECT button, and the radio will be returned to its factory
settings.
Hitachi A-Team DAB radio.qxd 30/11/2004 17:55 Page 11